UNS S31803 duplex stainless steel stockholders and suppliers, delivering to the whole of the UK. China JT Metal are suppliers of UNS S31803, a chromium nickel molybdenum austenitic ferritic grade. It combines improved resistance to stress corrosion cracking, pitting, crevice corrosion and high strength in comparison with other stainless steel grades. UNS S31803 grade duplex resists chloride environments and sulphide stress corrosion. It is approximately double the yield strength of standard austenitic stainless steel grades. As with other duplex stainless steel specifications oxidation resistance is good at high temperature, though it is prone to embrittlement when exposed to temperatures above 300°C and is prone to embrittlement at 475°C when exposed for 2 hours only. It is also subject to embrittlement between 370-540°C when exposed over a longer period.
Related Specifications
1.4462 BS EN 10088-3 ASTM A182 F51 X2CrNiMoN22-5-3
| Analysis |
|
| Form of Supply |
China JT Metal are suppliers and stockholders of round bar. Also available is UNS S31803 plasma cut duplex stainless plate and sheet. UNS S31803 duplex stainless steel ground steel bar can be supplied, providing a high quality stainless precision ground diameter bar to close tolerances. |
|
|
||
| Plate | Diameter |
| Applications |
UNS S31803 duplex can be used successfully as an alternative to standard stainless steel specifications in applications where higher strength and resistance to stress corrosion cracking is required. Widely used in the brewing, power generation, marine, petrochemical and chemical engineering industries. Typical applications include bushes, flanges, shafts and fasteners. |
| Corrosion Resistance |
UNS S31803 is resistant to intergranular corrosion. It has better corrosion resistance than that of other austenitic stainless grades such as 316, with higher resistance to stress corrosion cracking to that of either 304 or 316 stainless grades. Pitting corrosion and crevice corrosion is higher than that of 316. Due to its higher corrosion resistance UNS S31803 has better fatigue strength in corrosive environments than that of other austenitic stainless steel specifications. |
| Welding |
UNS S31803 (1.4462, F51) has good weldability similar to that of other stainless steel types. Low thermal expansion reduces residual stresses after welding. Use duplex welding electrodes similar to that of the parent steel when welding UNS S31083. Electric arc welding processes are suitable though oxyacetylene welding is not recommended due to the possibility of carbon pick up in the weld area of the UNS S31803. Whilst post weld annealing is not a requirement for many applications it will give optimum corrosion resistance in severe service conditions. We recommend you contact your welding consumables supplier who should provide you full assistance and information of welding UNS S31803 duplex. |
| Typical Physical Properties |
|
| Typical Mechanical Properties* |
*Mechanical Properties at room temperature (160mm dia max - solution treated) |
| Heat Treatment |
UNS S31803 (1.4462, F51) cannot be hardened by conventional heat treatment, though it is a work hardening steel. Duplex can be solution annealed at 1020-1100ºC, water quench. |
| Certification |
Duplex stainless steel grade UNS S31803 is available with BS EN 10204 3.1 mill certificate, please request when placing any orders. |
| Quality Assured Supply |
UNS S31803 duplex stainless is supplied in accordance with our ISO 9001 : 2008 registration. |
|
Contact China JT Metal with your enquiries for round bar, plate and sheet in duplex UNS S31803. |
友情链接：Inconel718 | 2205不锈钢
Copyright&Copy; 2002-2015 上海結騰精密模具廠/上海井騰金屬集團有限公司/上海井天進出口集團有限公司 All Rights Reserved. |
Email :admin@sh-jieteng.com |
老廠舊址：上海市松江區泗鳳公路228號中方上海辦事處中心：上海市松江區高技路655號
日方倉儲物控處：中國(上海)自由貿易試驗區外高橋保稅區德堡路38號
日方總務處：山口県光市中央六丁目1番19號
企業總機：86-021-57611748 傳真總機:86-021-57612426 集團官網：www.sh-jieteng.com 沪ICP备17010548号-1
